Elnec JetProg User Manual page 11

There are available two SW versions - for DOS (PG4U) and for
WIN95/98/NT/2000 (PG4UW). Control program is common for
all the ELNEC's
PREPROM-02aLV, 51&AVRprog, PIKprog and SEEprog).
Advanced design, including protection circuits, original brand
components and careful manufacturing allows us to provide a
one-year (51&AVRprog, PIKprog and SEEprog) to three-year
(JetProg, LabProg+, PREPROM-02aLV) warranty on parts
and labor for the programmers (limited 25,000 cycle warranty
on ZIF socket).
Free additional services:
• free technical support (phone/fax/e-mail).
• free lifetime software update via Web site.
Free software updates are available from our
Internet address www.elnec.com.
We also offer the following new services in our customer
support program: Keep-Current and AlgOR.
• Keep-Current is a service by which ELNEC ships to you the
latest version of the control program for programmer and the
updated user documentation. A Keep-Current service is your
hassle-free guarantee that you always have access to the
latest software and documentation, at minimal cost.
• AlgOR (Algorithm On Request) service allows you to receive
from ELNEC software support for programming devices not
yet available in the current device list.
Note: We don't recommend use programmers LabProg+,
PREPROM-02aLV, 51&AVRprog and PIKprog for In-circuit
programming. See FAQ on site www.elnec.com.
programmers
11
Introduction
(JetProg, LabProg+,