Table of Contents
Advertisement
2.5
Removing and Replacing the Front Cover
To remove the front cover, first move the LCD monitor/digital operator in the direction shown by arrow 1. Then squeeze the cover in the direction
shown by arrows 2 on both sides and lift in the direction shown by arrow 3.
Figure 2.4
Note: Do not replace the front cover with the LCD monitor/digital operator connected. The LCD monitor/digital operator will not be connected to the power regenerative unit.
Replace the front cover first and then install the LCD monitor/digital operator on the cover.
page 22
for replacing the LCD monitor/digital operator.
YASKAWA ELECTRIC TOEP C710656 01C YASKAWA - RC5 Instruction Manual
Front Cover
2
3
2
Figure 2.4 Removing and Replacing the Front Cover
2.5 Removing and Replacing the Front Cover
1
Refer to Removing and Replacing the LCD Monitor/Digital Operator on
21
Advertisement
Table of Contents
