Comtech EF Data KPA-040 Installation And Operation Manual page 42

KPA Ku-Band Indoor Solid-State Power Amplifier
Flash Upgrading
10 Verify the file transfer.
a) The M&C PC should report that the file transfer has occurred, and the display on the
b) The process sequences through several blocks – this will take several minutes. When
c)
d) Recycle the power and wait for the unit to reboot.
e) Verify that the new file loaded using the procedure in Step 1.
The Ethernet FTP Upload Procedure is now complete.
KPA will report:
Programming APP flash...
Please wait...
it has finished, the KPA front panel will display:
KPA-080-4045-I
Ver. X.X.X SNXXXXXXXXX
Terminate the FTP session by typing "bye" and closing the Command-line window.
4–4
Revision 1
MN/KPA.IOM