Comtech EF Data KPA-040 Installation And Operation Manual page 108

KPA Ku-Band Indoor Solid-State Power Amplifier
Appendix C
Command Arguments for
Parameter Type (Instr Code and Command or
Qualifier) Response to Query
FET Current N/A variable length
status
Retrieve N/A variable length, alpha
Maintenance numerical
Status
Description of Arguments
(Note that all arguments are ASCII numeric codes, i.e., ASCII codes between 48 and 57)
Query only.
Used to display all the FET currents.
Q01 and Q02 are in mA.
All other FETs are in Amps.
If it is not applicable, it will display xx.x.
Example: RFS?
Q01=xx.x'cr'
Q02=xx.x'cr'
Q03=xx.x'cr'
Q04=xx.x'cr'
...
Q32=xx.x'cr'
Q33=xx.x'cr'
Q34=xx.x'cr''lf'
Query only.
Used to query the maintenance status of the unit.
Example: <0001/RMS?
>0001/RMS=
V+28=+27.8
V+15=+15.0
V+7.5=+7.8
V+5=+5.0
V-5=-5.0
RF_PS1=09.9
RF_PS2=10.0
TEMP1=+09.0
TEMP2=-10.0
LTEMP=+10.0
FWPWR=029.0
RVPWR=<12.0
REFVT=+04.3
If it is not applicable, it will display xx.x – Example: TEMP2=xxx.x
C–14
Revision 1
MN/KPA.IOM
Query
Response to Query
(Instr Code and
(Target to controller)
Qualifier)
RFS? RFS=x....x
(see Description of
Arguments)
RMS? RMS=x....x
(see Description of
Arguments)