Procedure For F-Code Polling - Sharp MX-M350N Facsimile Operation Manual

Facsimile expansion kit
Hide thumbs Also See for MX-M350N:
Table of Contents

Advertisement

Checking and clearing document data in a memory box
The procedure for checking document data in an F-code polling memory box by printing it and the procedure for
clearing data from a box are almost the same as the procedures for printing and clearing document data from the
Public Box.
Instead of touching the [PUBLIC BOX] key in step 3 of "Printing document data in the Public Box" or "Deleting
document data from the Public Box" on page 3-16, touch the key of the desired memory box.
If a document icon (
has been stored in that box and you can print it out.
However, the contents cannot be printed or deleted while the memory box is being
used for transmission.

PROCEDURE FOR F-CODE POLLING

Make sure that a document has not been loaded in the auto document feeder or on the document glass, and then
follow the steps below.
NOTES
You must know the sub-address (SEP) and passcode (PWD) of the other machine's F-code polling memory box.
Serial polling (selecting multiple fax machines to be polled using a group key or by touching the [NEXT
ADDRESS] key) is not possible with F-code polling.
1
In fax mode, touch the [SPECIAL MODES]
key and then the
MODE SWITCH
ADDRESS REVIEW
SPECIAL MODES
SUB ADDRESS
FILE
TO RECEPTION
QUICK FILE
MEMORY:100%
2
Touch the [POLLING] key and then touch
the [OK] key.
POLLING
RESEND
SPEAKER
OK
POLLING
You will return to the initial screen.
NOTES
Cancelling a transmission
Press the [JOB STATUS] and cancel the transmission in the same way as when cancelling a stored
transmission. (See "CANCELLING A FAX TRANSMISSION" on page 2-9)
Only one F-code polling timer operation can be stored (see page 3-6).
) appears to the right of a memory box key, document data
key.
If the address book
screen appears, touch
the
[CONDITION
SETTINGS]
key
to
display
the
condition
settings screen (page 1-
5).
The [POLLING] key is
highlighted
and
the
polling icon appears.
To cancel polling, touch
the [POLLING] key once
again
to
cancel
the
selection.
F-CODE POLLING MEMORY
3
Enter the fax number, sub-address, and
passcode of the other fax machine.
SPE
CORPO.TPS
SHARP GROUP
sub-addresses and passcodes.
4
Press the [START] key.
CA
DATA
MARKETING GROUP
SHARP BRANCH EX
PUBLI
To use a one-touch key,
touch the [ADDRESS
BOOK] key to display
the address book.
Refer to steps 2 through
5 on page 4-3 for the
procedure for entering
"POLLING."
appears
on the screen.
After
communicating
with the other machine,
your machine prints the
received
document
data.
4-5
4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mx-m450nMx-m350uMx-m450uAr-fx12

Table of Contents