A Look At The Operation Panel - Sharp MX-M350N Facsimile Operation Manual

A LOOK AT THE OPERATION PANEL

The operation panel used for the fax function is described below.
Model
AR-M351N/AR-M451N
or when the document
filing function has been
added
AR-M351U/AR-M451U
Touch panel (following page)
• Messages and keys appear in the touch panel.
Touch the displayed keys to select functions and
enter settings.
• When a key in the touch panel is touched, a beep
sounds and the key is highlighted.
• Keys that cannot be selected in a screen are
greyed out. If touched, a double-beep will sound
to alert you that the key cannot be selected.
Mode select keys (page 2-2)
Use these keys to change modes.
[IMAGE SEND] key
Press to switch to fax mode. The main screen of fax
mode will appear.
The screen that appears when this key is selected
can be changed with "Default display settings" in
the key operator programs (page 8-4).
Numeric keys
Use to enter fax numbers, sub-addresses,
passcodes, and numerical
"MEMORY
SUB-ADDRESSES/PASSCODES
FOR F-CODE TRANSMISSION" on page 4-2.)
NOTE
For the names and functions of the parts of the machine, see page 1-9 of the "Operation manual (for general
information and copier operation)".
Key name Description in this manual
Described in the configuration where
the optional
(AR-FX12)
AR-M351N/AR-M451N models.
No functions related to document
filing or Internet fax reception are
described in this manual.
settings. (See
BOXES AND
REQUIRED
fax expansion kit
is installed on the
[C] key (clear key)
Use to clear a mistake when entering fax numbers,
sub-addresses,
settings. One digit is cleared each time you press
the key.
When an original is being scanned, this key can
also be used to cancel scanning.
[CA] key (clear all key)
Use to cancel a transmission or programming
operation. When this key is pressed, the operation
is cancelled and you return to the main screen
described on the following page.
This key is also used to cancel resolution, paper
size and special mode settings.
[ ] key (page 5-3)
This is used to produce tone signals when you are
on a pulse dial line.
[START] key (page 2-3)
Press to begin scanning an original for fax
transmission.
passcodes, and numerical
1-3
1