Convenient Dialing Methods - Sharp MX-M350N Facsimile Operation Manual

Facsimile expansion kit
Hide thumbs Also See for MX-M350N:
Table of Contents

Advertisement

CONVENIENT DIALING METHODS

The fax function includes a convenient auto dial feature (one-touch dialing and group dialing). By programming
frequently dialed numbers, you can call and send documents to these locations by means of a simple dialing
operation (refer to page 2-4). There are two types of auto-dialing: one-touch dialing and group dialing. To program
auto-dial numbers, refer to pages 6-3, 6-6.
One-touch dialing
Simply press a one-touch key and then press the [Start]
key to dial the programmed location. A name of up to 36
characters can be programmed for the location (a
maximum of 18 characters are displayed). When using
F-code transmission, a sub-address and passcode can
also be programmed (refer to page 4-2).
Group dialing
Multiple one-touch dial locations can be programmed into
a single one-touch key. This is convenient for successively
sending a document to multiple locations.
• Full fax numbers entered with the numeric keys can also
be stored in group keys.
Speed dialing
When a one-touch key or group key is stored in the
address book, the machine automatically assigns it a
3-digit speed dial number.
The
key and 3-digit Speed Dial number can be used
to abbreviate the transmission procedure.
Redialing
The machine keeps the last fax number dialed with the
numeric keys in memory. You can redial the last number
dialed by simply touching the [RESEND] key.
• If numeric keys were pressed during a phone
conversation, the [RESEND] key may not dial the correct
number.
• If the previous transmission was a broadcast
transmission in which one-touch keys were used, the
[RESEND] key cannot be used.
On-hook dialing
This is a dialing function. This feature allows you to dial
without lifting an extension phone connected to the
machine. Touch the [SPEAKER] key, listen for the dial
tone through the speaker, and then dial.
• Faxes must be sent manually when using on-hook dialing.
• On-hook dialing is not possible using a one-touch key that
includes a sub-address and passcode, or a group dial key.
NOTES
Programmed one-touch keys and group dial keys are stored on "index cards". A one-touch key or group key can
be easily accessed by touching the index key. (Refer to
To prevent calling or sending a fax to a wrong number, look carefully at the touch panel and make sure you
program the correct number when programming an auto-dial number. After storing a number, you can also print
out the stored number (Refer to page 6-16) to make sure it was stored correctly.
1-12
SHARP CORPORATION
0666211221
SHARP CORPORATION
CORPO.TPS
SHARP GROUP
FREQUENT USE
ABCD
EFGHI
JKLMN
SHARP GROUP
GROUP:025
SHARP CORPORATION
CORPO.TPS
SHARP GROUP
FREQUENT USE
ABCD
EFGHI
JKLMN
OPQRST
SPEAKER
PEAKER
RESEND
FAX
ADDRESS BOOK
SWITCH
ADDRESS REVIEW
SPEAKER
FAX
ADDRES
MODE SWITCH
ADDRESS
on page 1-5.)
Touch
the
[ADDRESS] key in
the initial screen to
display
the
left
screen.
OPQRS
Touch
the
[ADDRESS] key in
the initial screen to
display
the
left
screen.
RES

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mx-m450nMx-m350uMx-m450uAr-fx12

Table of Contents