Points To Check And Program After Installation; Connecting An Extension Phone - Sharp MX-M350N Facsimile Operation Manual

Facsimile expansion kit
Hide thumbs Also See for MX-M350N:
Table of Contents

Advertisement

POINTS TO CHECK AND PROGRAM
AFTER INSTALLATION
After installing the unit and before using it as a fax machine, check the following points and program the required
information.
Make sure the fax power switch is turned on
In addition to the machine power switch (see page 1-9 of the "Operation manual (for general information and
copier operation)"), the machine also has a fax power switch (see "Fax power switch" on page 0-4). When
using the machine, be sure to keep the fax power switch turned on at all times.
Make sure the correct date and time have been set
Make sure the correct date and time have been programmed in the unit (refer to page 2-11 of "Operation manual
(for general information and copier operation)"). If the date and time are wrong, please correct them.
It is important to set the correct date and time because they are used for such features as Timer Transmission
(page 3-6).
Program the sender's name and sender's number
The name and fax number of the user of the machine is programmed in "Fax own number and name set" (page
8-5) in the key operator programs.
The programmed name and number are printed at the top of each transmitted fax page. The sender's number
is also used as an identification number when you use the Polling function to request transmission from another
fax machine (See "USING THE POLLING FUNCTION" on page 3-14).

CONNECTING AN EXTENSION PHONE

You can connect a telephone to the machine and use it as an extension phone to place and receive calls like any
normal phone. Fax reception can also be activated from an extension phone connected to the machine. (remote
operation)
NOTES
If you connect a combination telephone/answering machine to the machine, you will not be able to use the
answering machine function.
You can place calls from the phone even during a power failure.

CONNECTING AN EXTENSION PHONE

1
Insert the end of the extension phone cord
into the extension phone socket on the
rear of the machine.
Extension
phone socket
1-2
Make sure you hear a
"click" sound indicating
that the cord is securely
connected.
NOTE
In New Zealand, not all standard telephones and
answering machines will respond to incoming
ringing when connected to the extension socket of
the equipment.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mx-m450nMx-m350uMx-m450uAr-fx12

Table of Contents