4-98
Ethernet Interface (Option)
The Ethernet interface uses either 10BASE–t, 100BASE–TX protocol. The Ethernet
version of the 7199 printer offers the web configuration, which configure the Ethernet
settings through a Web browser. For more information, refer to the
Interface Modes
Protocol
Application Layer TCP Socket, UDP Socket, SNMP, DHCP, HTTP
Transport Layer
Network Layer
Data Link Layer
Physical Layer
TCP Socket
It transfers printing commands and data, several status commands and those responses
by direct socket communications.
Port number
Maximum simultaneous sessions
Maximum simultaneous connections 6
Time out
UDP Socket
It transfers real time commands and those responses.
Port number
on page 70.
TCP, UDP
IP, ICMP, ARP
CSMA/CD
10BASE–t, 100BASE–TX (IEEE802.3 Conforming)
Auto negotiation 10/100Mbps Full/Half Duplex
3000 (Default)
9100 (Default)
1
120 seconds (Default)
Communication
Communication