Plug Size And Torque Chart - Danfoss 90 Series Service Manual

Service Manual
Torque chart

Plug size and torque chart

Series 90 Pumps
Item Fastener
P2B1/ Multi-function valve
P2A1
If any plugs or fittings are removed from the pump during servicing,install and torque as indicated in the
accompanying table.
C
Caution
Torque plugs or fittings installed into aluminum housings to the lower values specified for internal hex
plugs of the same size.
Always install new O-rings before reinstalling the plugs or fittings.
Item O-ring plug
B70, B72 9/16-18
B71 9/16-18
B80 1-1/16-12
B82, B83 9/16-18
G18 7/16-20
G45-G50 9/16-18
G52-G54 9/16-18
H90 (not shown) 1-5/16-12
N35, N36 (not shown) 9/16-18
N37 9/16-18
520L0818 • Rev 0101 • August 2015
Frame size Wrench size
030-100 1-1/4 in hex
130-250 1-5/8 in hex
Wrench size
3/16 internal hex wrench
3/16 internal hex wrench
9/16 internal hex wrench
1/4 internal hex wrench
3/16 internal hex wrench
11/16 inch hex wrench
1/4 internal hex wrench
5/8 internal hex wrench
11/16 inch hex wrench
1/4 internal hex wrench
Torque
89 N•m [66 lbf•ft]
210 N•m [155 lbf•ft]
Torque
40 N•m [30 lbf•ft]
12 N•m [9 lbf•ft]
115 N•m [85 lbf•ft]
40 N•m [30 lbf•ft]
12 N•m [9 lbf•ft]
40 N•m [30 lbf•ft]
23 N•m [17 lbf•ft]
70 N•m [52 lbf•ft]
37 N•m [27 lbf•ft]
40 N•m [30 lbf•ft]
69