Footswitch Operation - Chauvet DJ 4BAR LT BT User Manual

Operation

Footswitch Operation

The included footswitch provides quick access to preset colors and programs.
To use the footswitch:
1. Connect the product to power.
2. Connect the footswitch to the 4BAR LT BT with the attached 4-pin cable.
3. Press the left pedal (Programs) to activate control. When working, the product will output white.
4. Use the chart below to activate the desired function.
Pedal
Left
(Programs)
Right
(Blackout)
Both
To disconnect the footswitch:
1. Unplug the footswitch from the 4BAR LT BT.
2. Disconnect the product from power.
3. Reconnect the product to power to operate without the footswitch.
The 4BAR LT BT footswitch will work properly in any mode. No settings need to be
modified before using the footswitch.
4BAR LT BT User Manual Rev. 1
Action
Tap pedal to activate, then
tap to cycle through
functions
Tap
Press and Hold
Tap
Press and Hold
Function
White
Red
Green
Blue
Yellow
Magenta
Cyan
Automatic program (snap)
Automatic program (fade)
Blackout
Fade to/from blackout
Sound-active program
Strobe on
Page 11 of 16