Setup
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the
Orientation
The 4BAR LT BT may be mounted in any position; however, make sure adequate ventilation is provided
around the product.
Rigging
•
Before deciding on a location, always make sure there is easy access to the product for
maintenance and programming.
•
Make sure adequate ventilation is provided around the product.
•
Make sure that the structure or surface onto which you are mounting the product can support the
product's weight. (see the
•
When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.
•
When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
•
When mounting the product on the floor, make sure that the product and cables are away from
people and vehicles.
Mounting Diagram
Safety Cable
(such as CH-05 from
Chauvet)
Hanging Bracket (x2)
Bracket Adjustment
Knob (x2)
4BAR LT BT User Manual Rev. 1
Technical
Specifications)
Tripod Insertion Point
Safety
Mounting Clamp (x2)
(such as CLP-15 from
Chauvet)
Clamp Hanging
Bolt (x2)
Pod Pan Adjustment
Knob (x4)
Pod Tilt Adjustment
Knob (x2 per pod)
Tripod Adjustment Knobs
Page 5 of 16
Notes.