Wireless Footswitch; Footswitch Operation - Chauvet DJ 4BAR QUAD User Manual

Operation

Wireless Footswitch

The included wireless footswitch provides quick access to preset colors, color-change programs, and
sound-activation through the 4BAR Quad microphone.
To use the footswitch:
1 2 3

Footswitch Operation

Pedal Action
1
(Auto Programs)
2
(Sound Mode)
3
(Static Colors)
4
(Blackout)
The 4BAR Quad footswitch will work properly in any mode, with a maximum unobstructed
distance of 100 ft (30.5 m). You must turn on the ir on the 4BAR Quad, set the ir channel,
and navigate to Auto mode before using the footswitch.
4BAR Quad User Manual Rev. 2
1. Connect the 4BAR Quad to power. Turn the wireless footswitch on.
2. Press <MENU> on the 4BAR Quad until SEt shows on the display,
and press <ENTER>.
4
3. Use <UP> or <DOWN> to select ir, then press <ENTER>.
4. Use <UP> or <DOWN> to select on, then press <ENTER>.
5. Press <MENU> on the 4BAR Quad repeatedly until P-- shows on the
display, and press <ENTER>.
6. Press pedal # 3 to activate Static Color controls. When working, all
the lights will begin in a static color and FOOt will appear on the
Menu display.
7. Use the chart below to activate the desired function.
Tap pedal to activate, then tap to
navigate to desired function
Press and hold
Tap
Press and hold
Tap
Press and hold
Functions
Auto Programs 1–8
Sound-active programs
Red, Green, Blue, and Amber
Red
Green
Blue
Amber
Red and Green
Red and Blue
Red and Amber
Green and Blue
Green and Amber
Blue and Amber
Red, Green, and Blue
Red, Green, and Amber
Red, Blue, and Amber
Green, Blue, and Amber
3000K
4500K
5600K
Auto snap program
Auto fade program
Auto fade program
Blackout
Fade to blackout
Page 11 of 18