Configuration (Bluetooth); Configuration (Standalone); Automatic Programs; Auto-Program Speed - Chauvet DJ 4BAR LT BT User Manual

Operation

Configuration (Bluetooth)

The 4BAR LT BT can be operated with the BTAir application over a Bluetooth connection.
1. Download and install the BTAir app from your preferred app store.
2. Press <MENU> repeatedly until bLE shows on the display.
3. Press <ENTER>.
4. The app will find and pair automatically to all the BT series products within range.

Configuration (Standalone)

Set the product in one of the standalone modes to control without a DMX controller.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX signals
that could interfere with the DMX signals from the controller.

Automatic Programs

To run the 4BAR LT BT in automatic mode, follow the instructions below.
1. Press <MENU> repeatedly until P-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select and automatic program, from P 1–8.
4. Press <ENTER>.

Auto-Program Speed

To change the auto-program speed on the 4BAR LT BT, do the following:
1. Press <MENU> repeatedly until S-- shows on the display.
2. Use <UP> or <DOWN> to increase or decrease the program speed, from S. 1–100.
3. Press <ENTER>. The product will return to Auto mode.

Sound-Active Mode

To run the 4BAR LT BT in sound-active mode, follow the instructions below.
1. Press <MENU> repeatedly until Snd shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select a sound-active program, from Snd1–8.
4. Press <ENTER>.
The product will only respond to low frequencies of music (bass and drums).

Preset Color Mode

To run the 4BAR LT BT on a static color, do the following:
1. Press <MENU> repeatedly until C-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select a static color, from C 1–19.
4. Press <ENTER>.

Custom Color Mixing

To custom mix a static color, follow the instructions below.
1. Press <MENU> repeatedly until u-- shows on the display.
2. Press <ENTER> and one of the following will show on the display:
• r. _ _ _ (red)
• G. _ _ _ (green)
• b. _ _ _ (blue)
• S. _ _ _(strobe rate)
3. Press <ENTER> to cycle through the options.
4. Use <UP> or <DOWN> to increase or decrease the selected value, from 0–255 (for red, green, or
blue) or from 0–100 (for strobe rate).
• Strobe rate - 0: no function, 1–99: slow to fast, 100: sound-active.
5. Repeat steps 3 and 4 until the color is set as desired.

Dimmer

To adjust the output level of the 4BAR LT BT, do the following:
1. Press <MENU> repeatedly until d-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the dimmer value, from L. 1–255.
4. Press <ENTER>.
4BAR LT BT User Manual Rev. 1 Page 9 of 16