Wireless Footswitch Operation - Chauvet DJ 4Bar Quad Quick Reference Manual

Wireless Footswitch Operation

Power
Switch
The included wireless footswitch provides quick access to preset colors, color-change programs, and sound-activation
through the 4BAR Quad microphone.
To use the footswitch:
1. Connect the 4BAR Quad to power. Turn the wireless footswitch on.
2. Press <MENU> repeatedly until SEt shows on the display, and press <ENTER>.
3. Use <UP> or <DOWN> to select ir, and press <ENTER>.
4. Use <UP> or <DOWN> to select on, and press <ENTER>.
5. Press <MENU> repeatedly until P-- shows on the display, and press <ENTER>.
6. Press pedal #3 to activate static color controls. When working, all the lights will begin in a static color and FOOt
will appear on the Menu display.
7. Use the chart below to activate the desired function.
Pedal
1
(Auto Programs)
2
(Sound Mode)
3
(Static Colors)
4
(Blackout)
The 4BAR Quad footswitch will work properly in any mode, with a maximum unobstructed distance of
100 ft (30.5 m). You must turn on the ir setting from the 4BAR Quad and navigate to Auto mode before
using the footswitch.
4BAR Quad QRG Rev. 3
QUICK REFERENCE GUIDE
LED
Indicators
Action
Tap pedal to activate, then
tap to navigate to desired
function
Press and hold
Tap
Press and hold
Tap
Press and hold
9-Volt
Battery
Function
Auto Programs 1–8
Sound-active programs
Red, Green, Blue, and Amber
Red
Green
Blue
Amber
Red and Green
Red and Blue
Red and Amber
Green and Blue
Green and Amber
Blue and Amber
Red, Green, and Blue
Red, Green, and Amber
Green, Blue, and Amber
Auto snap program
Auto fade program
Blackout
Fade to blackout
1 3
2
EN
4
4