Wireless Footswitch Operation; Footswitch Operation - Chauvet DJ 4BAR Flex Q User Manual

O
PERATION

Wireless Footswitch Operation

The included wireless footswitch provides quick access to preset colors, color-change programs, and
sound-activation through the 4BAR Flex Q microphone.
3
1 2

Footswitch Operation

Pedal
1
(Auto program)
2
(Sound mode)
3
(Static colors)
4
(Blackout)
The 4BAR Flex Q footswitch will work properly in any mode, with a maximum
unobstructed distance of 100 ft (30.5 m). You must turn on the ir setting from the
4BAR Flex Q and navigate to Auto mode before using the footswitch.
4BAR Flex Q User Manual Rev. 1
To use the footswitch:
1. Connect the 4BAR Flex Q to power. Turn the wireless footswitch on.
4
2. Press <MENU> repeatedly until SEt shows on the display, and
press <ENTER>.
3. Use <UP> or <DOWN> to select ir, and press <ENTER>.
4. Use <UP> or <DOWN> to select on, and press <ENTER>.
5. Press <MENU> repeatedly until P-- shows on the display, and
press <ENTER>.
6. Press pedal #3 to activate static color controls. When working, all
the lights will begin in a static color and Foot will appear on the menu
display.
7. Use the chart below to activate the desired function.
Action
Tap pedal to activate, then tap to
navigate to desired function
Press and hold
Tap
Press and hold
Tap
Press and hold
Function
Auto programs 1–8
Sound-active programs
Red, green, blue, and amber
Red
Green
Blue
Amber
Red and green
Red and blue
Red and amber
Green and blue
Green and amber
Blue and amber
Red, green, and blue
Red, green, and amber
Green, blue, and amber
Auto snap program
Auto fade program
Blackout
Fade to blackout
Page 12 of 19