Wireless Footswitch Operation - Chauvet DJ 4BAR Flex Q Quick Reference Manual

Wireless Footswitch Operation

The included wireless footswitch provides quick access to preset colors, color-change programs, and sound-activation
through the 4BAR Flex Q microphone.
Power
switch
LED
indicators
To use the footswitch:
1. Connect the 4BAR Flex Q to power. Turn the wireless footswitch on.
2. Press <MENU> repeatedly until SEt shows on the display, and press <ENTER>.
3. Use <UP> or <DOWN> to select ir, and press <ENTER>.
4. Use <UP> or <DOWN> to select on, and press <ENTER>.
5. Press <MENU> repeatedly until P-- shows on the display, and press <ENTER>.
6. Press pedal #3 to activate static color controls. When working, all the lights will begin in a static color and Foot
will appear on the menu display.
7. Use the chart below to activate the desired function.
Pedal
1
(Auto program)
2
(Sound mode)
3
(Static colors)
4
(Blackout)
The 4BAR Flex Q footswitch will work properly in any mode, with a maximum unobstructed
distance of 100 ft (30.5 m). You must turn on the ir setting from the 4BAR Flex Q and navigate to
Auto mode before using the footswitch.
4BAR Flex Q USB QRG Rev. 1
QUICK REFERENCE GUIDE
4
3
2
Action
Tap pedal to activate, then tap to
navigate to desired function
Press and hold
Tap
Press and hold
Tap
Press and hold
1
Auto programs 1–8
Sound-active programs
Red, green, blue, and amber
Red
Green
Blue
Amber
Red and green
Red and blue
Red and amber
Green and blue
Green and amber
Blue and amber
Red, green, and blue
Red, green, and amber
Green, blue, and amber
Auto snap program
Auto fade program
Blackout
Fade to blackout
9-volt battery
cover
Function
EN
4