Configuring Gts In Non-Policy Approach - HP A6600 Configuration Manual

To do...
6. Configure a GTS
action.
7. Return to system view.
8. Create a policy and enter policy view.
9. Associate the class with the traffic
behavior in the QoS policy.
10. Return to system view.
11. Apply the QoS policy.

Configuring GTS in non-policy approach

When configuring GTS in non-policy approach, configure the following types of GTS:
 ACL-based GTS: setting GTS parameters for the traffic matching the specific ACL. By specifying multiple
ACLs, set GTS parameters for different classes of traffic.
GTS for all traffic: configuring GTS parameters for all traffic.

Configuring ACL-based GTS
To do...
1. Enter system view.
2. Defining an ACL.
3. Enter interface view.
4. Configure ACL-based GTS on the interface.
Configuring GTS for all traffic
To do...
1. Enter system view.
2. Enter interface view.
3. Configure GTS on the interface.
Command...
gts cir committed-information-rate [ cbs
In absolute value committed-burst-size [ ebs excess-burst-size
[ queue-length queue-length ] ] ]
gts percent cir cir-percent [ cbs cbs-time [ ebs
In percentage
ebs-time ] ]
quit
qos policy policy-name
classifier tcl-name behavior behavior-name
quit
To an interface Applying the QoS policy to an interface or
or PVC PVC
To a VLAN Applying the QoS policy to a VLAN
Command...
system-view
See ―Error! Not a valid result for
table.‖
interface interface-type interface-number
qos gts acl acl-number cir committed-
information-rate [ cbs committed-burst-size
[ ebs excess-burst-size [ queue-length
queue-length ] ] ]
Command...
system-view
interface interface-type interface-number
qos gts any cir committed-information-rate [ cbs
committed-burst-size [ ebs excess-burst-size [ queue-
length queue-length ] ] ]
39
Remarks
Required.
—
—
—
—
—
—
Remarks
—
Required.
—
Required.
Remarks
—
—
Required.