Dascom DC-7600 User Manual page 93

Dascom DC-7600
Faults
Defective Spots
White Line
Vague or Light Image
Bent Cards
Print peels off
Blank Cards
Probable Cause
Dirty Card Surface
Cleaning Roller
Ribbon not properly
installed
Dirty or defective print
head
Improper
ribbon/retransfer
film installation
Ribbon not
synchronized
Dirty printer or
cleaning rollers
Non-genuine cards
Substandard retransfer
process.
Substandard retransfer
process.
Improper ribbon
installation
Corrective Actions
Check that card surfaces are clean and dust
•
free.
Use new, clean cards.
•
Clean the transport rollers
•
Check the proper installation of the ribbon
and retransfer film.
Check if ribbon/retransfer film are folded up.
Please contact local reseller.
Check the proper installation of the ribbon
and retransfer film.
Check if ribbon/retransfer film are folded up.
Open and close
synchronize the ribbon.
Clean printer
Check if your cards meet specifications.
Recommend that you purchase cards from
Dascom authorized reseller.
If the problem persists, please contact
your Dascom reseller.
Set decurl time. Correct card curl from Section
5.3.1.
Make sure ribbon and film are installed
correctly. And set the retransfer parameters.
Check that print ribbon and retransfer
film are installed properly.
80
User Guide V1.0
the front cover to