Face Up/Down Stacking For Output Cards; Optimizing Print Quality - Dascom DC-7600 User Manual

Dascom DC-7600

2.1.4 Face Up/Down Stacking for Output Cards

User can set up the output cards face up or down.
Face Up: Correctly printed cards are arranged with the printed surface facing up after printing.
Face Down: Correctly printed cards are arranged with the printed surface facing down
after printing.
Follow the below procedures to change the stacking orientation:
 Refer Section 3.2 to change from Normal Mode to User Mode.
 Press the ▼ Key until [Card Setup] is displayed. Press the SET Key.
 Press the ▼ Key until [Eject Face] is displayed. Press the SET Key.
 Press the ▼/▲ Key to change the stacking orientation. Press the SET Key.
Auto is the factory default for output cards stacking.

2.1.5 Optimizing Print Quality

For optimizing print quality, you can change the retransfer settings refer to the card you want to
print.
You can select proper card type by LCD panel settings or Windows driver software to optimize
the print quality, which is determined by the retransfer speed/temperature on various card
materials.
Follow the below procedures to change the card type:
 Refer Section 3.2 to change from Normal Mode to User Mode.
 Press the ▼ Key until [Card Setup] is displayed. Press the SET Key.
 Press the ▼ Key until [Card Type] is displayed. Press the SET Key.
 Press the ▼/▲ Key to select the proper type: PVC
PET PET-G
Card 1（35,0）
Card 2（35,0）
Card 3（35,0）
User Guide V1.0
26