Dascom DC-7600 User Manual page 43

Dascom DC-7600
To load a new ribbon onto cartridge,

place or engage orange spoolof
ribbon to feeding hub of the cartridge.
While unwinding the ribbon film,

route the film around three guiding
poles.
Finally engage the black spool to the

winding hub of cartridge.
Apply some force to push in the spools to the hubs.
The ribbon should be slightly tightened and not slanted.
As shown in the right diagram, push in

the ribbon cartridge to the far end until
a "click" is heard to indicate correct
insertion.
User Guide V1.0
30