Chapter 3 Normal Mode And User Mode; Normal Mode - Dascom DC-7600 User Manual

Dascom DC-7600

CHAPTER 3 NORMAL MODE AND USER MODE

You can change between Normal and User Modes when the printer is operating.
This section outlines the differences between these two modes and how to switch from one
to the other.

3.1 Normal Mode

Normal mode: After start up, the printer goes into Normal Mode in which the printer can
print cards.
In this mode, after you press the ▲Key for 1 second, the LCD displays the unused ribbon
and retransfer film indicated by a series of "*"marks. Each "*"represents 20% remaining:
In this mode, after you press the ▼Key for 1 second, the LCD displays the temperature of
the heater unit and print head:
Normal Mode Message List:
Initialize
Heating
Ready
Printing
Power Save Mode
Ribbon Empty[*****]Full
RTF Empty[*****]Full
Heater Temp： 203℃
Print head Temp： 38℃
The printer undergoes system diagnostic and
initialization. Cards remaining
a previous irregular session will be ejected.
The heater unit is warming up.
The printer is awaiting host requests or
commands.
The printer is in a printing session.
The printer is in an energy saving state.
56
User Guide V1.0
in printer from