Installing An M.2 Card - DFI WM342-KD Series Installation Manual

Installing an M.2 Card

The system is equipped with one M.2 socket, supporting both the M.2
22x60mm and 22x80mm (key M) form factors. Use the following procedure
to install an M.2 card:
1. To install an M.2 type 2260 card, please install the standoff at the 60mm
mounting position first.
2. Align the notch at the edge of the M.2 card with the key in the connector.
3. Insert the M.2 card into the connector.
Note:
The M.2 slot is available in WM342-KD331 (both Intel
®
with Intel C236 chipset supports Intel
®
C236 and Q170 chipsets); the SKU
®
Optane™ memory.
9
Standoff
M.2 card