User Account Administration - Siemens SIRIUS 3RW55 Manual

7.16

User account administration

Operating principle
In combination with the SIRIUS Soft Starter ES software (TIA Portal), the 3RW55 soft starter
supports the function of user account administration.
Before a user is able to log in to the 3RW5 HMI High-Feature, the user administrator must
first set up a user account with HMI User PIN using the SIRIUS Soft Starter ES software
(TIA Portal). The user account is transferred to the 3RW55 soft starter using the local
interface, 3RW5 communication module or a Micro SD Card.
Using their HMI User PIN, the user logs in via the "User login" on the 3RW5 HMI
High Feature. The user account administration performs a comparison between the user
account data stored in the device and the HMI User PIN entered by the user. If the data
matches, the user is granted access with the access rights that are stored in the user
account data until the user monitoring time has elapsed and the user logs out, or the user
logs out by means of the "User logout" function. The access rights are not contained directly
in the user account data, but indirectly as user roles.
More information about setting up a user account can be found in the online help for SIRIUS
Soft Starter ES (TIA Portal).
You can find further information on logging in and out using the HMI User PIN in Chapter
User login and logout (Page 169).
Requirements
● User account has been set up in SIRIUS Soft Starter ES (TIA Portal).
● User account has been transferred with SIRIUS Soft Starter ES (TIA Portal) via one of the
following paths to the 3RW55 soft starter:
– Local interface
– Fieldbus via suitable 3RW5 communication module
– Micro SD card
SIRIUS 3RW55 soft starter
Manual, 08/2018, A5E35630887002A/RS-AB/002
7.16 User account administration
Functions
147