Functions
7.13 Outputs
7.13.3
Cyclic send data
Operating principle
For "measured value 1", "measured value 2" and "measured value 3" specify one measured
value from the following list in each case:
● Phase current I L1 (rms) (factory setting measured value 1)
● Phase current I L2 (rms) (factory setting measured value 2)
● Phase current I L3 (rms) (factory setting measured value 3)
● Power factor L1..3
● Phase current average (rms)
● Active energy import (total)
● Active power PL1..3
142
SIRIUS 3RW55 soft starter
Manual, 08/2018, A5E35630887002A/RS-AB/002