Table of Contents
Advertisement
Mounting and dismantling
3.3 Mounting the 3RW55 soft starter on a level surface
Procedure
Heavy device.
Device can cause injury if it falls.
Always ask a second person to help you transport, install and dismantle a heavy device.
Use suitable lifting equipment and wear personnel protective equipment.
● Screw the lower 2 screws into the mounting plate
minimum of 1.5 cm (min. 2 cm for size 4) and then place the 3RW55 soft starter onto the
2 lowermost screws
● Tilt the 3RW55 soft starter up so that it is resting level against the mounting plate
tighten all 4 screws
44
CAUTION
②
from above.
④
.
①
. Ensure that both screws protrude a
SIRIUS 3RW55 soft starter
Manual, 08/2018, A5E35630887002A/RS-AB/002
③
and
Hide quick links:
Advertisement
Table of Contents
