Example circuits
A.2 Control circuit connection
A.2.4
Connecting the temperature sensor
Requirements
● Motor with temperature switch (e.g. Thermoclick) or thermistor (e.g. PTC type A)
● Parameterization required
Procedure
1. Connect the temperature sensor:
2. Parameterize the temperature sensor.
You will find more information on parameterizing the temperature sensor in Chapter
Thermistor motor protection with temperature sensor (Page 112).
Result
The 3RW55 soft starter monitors the motor for excessive temperature. If the temperature is
exceeded, a warning is generated or the motor is switched off depending upon the
parameterization. Restarting takes place after a reset.
210
Temperature switch at terminals T1-T2
Thermistor at terminals T1-T2
SIRIUS 3RW55 soft starter
Manual, 08/2018, A5E35630887002A/RS-AB/002