Siemens SIRIUS 3RW55 Manual page 70

Parameter assignment
5.1 Parameterizing the 3RW55 soft starter
Procedure
Set the desired parameters depending on the selected application:
1. Set the motor parameters. (Page 72)
Menu: "Parameters > Soft Starter > Motor parameters"
2. Set the start parameters. (Page 80)
Menu: "Parameters > Soft Starter > Start settings"
Alternatively, use the automatic parameterization. (Page 81)
Menu: "Parameters > Soft Starter > Automatic parameterization"
3. Set the stopping mode parameters. (Page 96)
Menu: "Parameters > Soft Starter > Settings stopping mode"
4. Set the motor protection. (Page 108)
Menu: "Parameters > Soft Starter > Motor protection"
5. Set the creep speed function. (Page 115)
Menu: "Parameters > Soft Starter > Creep speed"
6. Set the Condition Monitoring parameters. (Page 117)
Menu: "Parameters > Soft Starter > Condition Monitoring"
7. Set the asymmetry monitoring parameters. (Page 129)
Menu: "Parameters > Soft Starter > Asymmetry"
8. Set the ground fault monitoring parameters. (Page 130)
Menu: "Parameters > Soft Starter > Ground fault"
9. Set the emergency start. (Page 131)
Menu: "Parameters > Soft Starter > Emergency start"
10.Set the number of parameter sets. (Page 133)
Menu: "Parameters > Soft Starter > Number of parameter sets"
11.Set the inputs. (Page 134)
Menu: "Parameters > Soft Starter > Inputs"
12.Set the outputs. (Page 139)
Menu: "Parameters > Soft Starter > Outputs"
13.Set the additional parameters. (Page 143)
Menu: "Parameters > Soft Starter > Additional parameters"
14.Set the date and time (Page 146).
Menu: "Parameters > Soft Starter > Date and time"
15.Define the characteristics to be monitored.
Monitoring the measured values of the 3RW55 soft starter with the 3RW5 HMI
High Feature (Page 160)
Menu: "Monitoring > Measured values"
Monitoring the process image of the 3RW55 soft starter with the 3RW5 HMI High Feature
(Page 161)
Menu: "Monitoring > Process image"
70
SIRIUS 3RW55 soft starter
Manual, 08/2018, A5E35630887002A/RS-AB/002