Mounting and dismantling
3.4 Installing / mounting / removing 3RW5 HMI High Feature
3.4.2
Installing the 3RW5 HMI High Feature in the 3RW55 soft starter
Requirements
● 3RW5 HMI High Feature
● HMI connecting cable, 0.1 m (accessories)
Procedure
NOTICE
Material damage caused by electrostatic charge.
ESD devices can be destroyed by voltages well below the threshold of human perception.
These static voltages develop when you touch a component or electrical connection of a
device without having discharged your own body. The electrostatic discharge current may
result in latent failure of a module, that is, this damage may not be apparent immediately,
but may cause malfunction after a lengthy period of operation.
● Observe the coding of the plug and socket
● Observe the cable routing:
①
③
46
Cable routing to the right
Cable routing to the left
①
③
+
.
Manual, 08/2018, A5E35630887002A/RS-AB/002
SIRIUS 3RW55 soft starter