Mitsubishi Electric MELSEC iQ-R Series User Manual page 33

9.
Checking errors
Check the READY LED and ERROR LED on the C Controller module. When any error occurred, perform the troubleshooting.
When any errors caused by factors other than the C Controller module occurred, refer to the manual for each module used.
10.
Creating a user program
Create a user program
• Create a user program and debug it. (Page 48 Creating User Program)
• Create a script file. (Page 52 Creating Script File)
• Register the user program and the script file to the C Controller module. (Page 54 Registering User Program)
11.
Resetting the C Controller system
Reset the system by one of the following methods.
• Turning the power of the system OFF and ON
• Resetting the C Controller module (Page 41 Switch Operation)
12.
Executing the program
Change the operating status of the C Controller module to RUN, and check that the BUS RUN LED turns ON. (Page 41
Switch Operation)
6 PROCEDURE BEFORE OPERATION
6
31