Sd Memory Card - Mitsubishi Electric MELSEC iQ-R Series User Manual

SD memory card

Only one SD memory card can be inserted in a single C Controller module.
Available memory cards
The following Mitsubishi Electric Corporation's SD memory cards are available.
Model name
NZ1MEM-2GBSD
NZ1MEM-4GBSD
NZ1MEM-8GBSD
NZ1MEM-16GBSD
For commercially available SD memory cards, refer to the following document. Before using any commercially available SD
memory card, it is advised to check and ensure that the card has no impact on the control of the system.
TECHNICAL BULLETIN No. FA-A-0023
Precautions
• Use the format function of CW Configurator to format an SD memory card.
• If any SD memory card other than the one listed above is used, data in the SD memory card may be corrupted or a system
shutdown may occur.
• If the power is turned OFF or a C Controller module is reset, or the SD memory card is removed while the card is being
accessed, data in the SD memory card may be corrupted. Always turn the power OFF or reset a C Controller module, or
remove an SD memory card after the access to the card has been stopped.
3 SYSTEM CONFIGURATION
22
3.2 Peripheral Configuration
Description
SD memory card 2 GB
SD memory card 4 GB
SD memory card 8 GB
SD memory card 16 GB