Setting Procedure - Epson TM-L90 Technical Reference Manual

2.5.2 Setting Procedure

1. Turn off the power.
2. Pull the cover open lever, and open the roll paper cover.
3. Push the body case outward (in the direction of the 2 arrows) and remove the cutter cover.
4. Remove the single screw retaining the cutter unit and loosen the screw indicated by the
circle in the illustration below.
Remove this screw
5. Lift the top of the cutter unit upward and remove it.
38 Setup
cutter cover
Loosen this screw
Cutter unit
Lift upwards