Epson TM-L90 Technical Reference Manual page 48

Customized values
Item
NV user memory capacity
NV graphics memory capacity
Print density
Print speed
Default character code table
Default international character
Selection of the interface
Number of divisions of thermal head
energizing
Automatic replacement of Font A
Automatic replacement of Font B
Paper selection
(monochrome or two-color)
Paper width
Black-color density in two-color
*2
printing
*1
Buzzer control
*1: Not available for TM-L90 other than 4** models
*2: Not available for TM-L90 4** models
*3: Selectable 38, 58, 60, 70, 80 mm only
Note:
❏ The maximum print speed is available for only the one-part energizing mode. However, if the print
duty is too high in the one-part energizing mode, the printer will automatically reduce the printing
speed.
❏ The four-part energizing mode reduces power consumption.
❏ The print width can be set in 43 ways with 1 mm pitches in the range from 38 mm to 80 mm.
However, it cannot be set in the range from 71 mm to 79 mm.
48 Setup
Option
(underlined: initial setting)
1KB, 64KB, 128KB, 192KB
None, 64KB, 128KB, 192KB, 256KB, 320KB,
384KB
70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%,
110%, 115%, 120%, 125%, 130%, 135%, 140%
Level 1 (Slow) - Level 6 - Level 9 (Fast)
*1
Initial setting: Page 0: PC437 (USA, Standard
Europe)
*1
Initial setting: USA
*1
Auto, UIB, Built-in USB
1, 2, 3, 4
*1
Do not replace, Font B
*1
Do not replace, Font A
Monochrome, two-color
*2
38 mm - 80 mm (1 mm pitches)
Light, Medium, Dark
Buzzer selection: Internal, Option, Disable
Buzzer frequency: Continuous, 1 time, No
sound
Sound pattern: Pattern A, B, C, D, or E
(Refer to "Setting items of TM-L90 4** models"
on page 121, about the initial settings.)
Msw Msw
Setting Setting
utility Mode
✓
✓
✓ ✓
*1
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓
✓ ✓
✓ ✓
✓ ✓
*3
✓ ✓
✓
✓ ✓