Connecting Ac Adapter (Ps-180); Attaching Ac Adapter - Epson TM-L90 Technical Reference Manual

2.4 Connecting AC adapter (PS-180)

Be sure to use the PS-180 or the equivalent product as the AC adapter.
CAUTION:
Be sure to remove the AC cable from the wall outlet whenever connecting or
disconnecting the AC adapter to the printer. Failure to do so may result in damage to
the AC adapter or the printer.
Be sure to confirm that the wall outlet power supply satisfies the rated voltage
requirements of the AC adapter. Never insert the AC cable plug into a socket that does
not meet the rated voltage requirements of the AC adapter. Doing so may result in
damage to both the AC adapter and the printer.

2.4.1 Attaching AC adapter

The following is an explanation of the procedure for attaching the power unit to the TM-L90.
1. Confirm that the printer's power supply is turned off and the AC adapter's AC cable has
been removed from the wall outlet.
2. To place cables, first break off by hand any of the three perforations to pass the cables
through indicated by circles in the illustration (the other one is on the right). Then put the
cables through the holes and replace the bottom of the cover.
TM-L90/TM-L90 Peeler Model Technical Reference Guide
Setup 35