Epson TM-L90 Technical Reference Manual page 61

5. With the roll paper cover open, turn on the power while pressing the FEED button
inside the printer.
(Keep pressing the FEED button until the ERROR LED comes on.)
6. Check that the ERROR LED is on, and release the FEED button.
7. Press the FEED button 6 times.
8. Then, close the roll paper cover.
The printer feeds several labels and remembers the label paper size. This completes the
task.
❏ TM-L90 Peeler Model setting procedure (procedure for setting the paper type and size in the
printer)
There are the following 2 cases.
<When the power is off>
1. Open the peeler cover.
2. Open the roll paper cover.
3. Set the roll paper in the printer.
4. With the roll paper cover open, turn on the power while pressing the FEED button
inside the printer.
(Keep pressing the FEED button until the ERROR LED comes on.)
5. Check that the ERROR LED is on, and release the FEED button.
6. Press the FEED button 6 times.
7. For peeling issuing, set the end of the roll paper in the peeler, and for continuous
issuing, set it in the ejection path, and close the roll paper cover. The printer feeds
several labels and remembers the label paper size. This completes the task.
8. For peeling issuing, after setting the paper, the PAPER OUT LED flashes. To print, insert
the label into the peeler path, and press the FEED button.
<When the power is on>
1. Open the peeler cover.
2. Open the roll paper cover.
3. With the roll paper cover open, press the FEED button inside the printer.
4. Close the roll paper cover.
The PAPER OUT LED flashes.
TM-L90/TM-L90 Peeler Model Technical Reference Guide
Setup 61