Epson TM-L90 Technical Reference Manual page 53

Customized values
Item
NV user memory capacity
NV graphics memory capacity
Print density
Print speed
Default character code table
Default international character
Number of divisions of thermal
head energizing
Paper selection (monochrome or
*2
two-color)
Paper width
Black-color density in two-color
*2
printing
*1: Not available for TM-L90 Peeler other than 39* models
*2: Not available for TM-L90 Peeler 39* models
*3: Selectable 38, 58, 60, 70, 80 mm only
Note:
❏ The maximum print speed is available for only the one-part energizing mode. However, if the print
duty is too high in the one-part energizing mode, the printer will automatically reduce the printing
speed.
❏ The four-part energizing mode reduces power consumption.
❏ The print width can be set in 43 ways with 1 mm pitches in the range from 38 mm to 80 mm.
However, it cannot be set in the range from 71 mm to 79 mm.
❏ Depending on the paper type, it is recommended to set the print density as shown in the table below
for the best print quality.
Receipt
Label
Option
(underlined: initial setting)
1KB, 64KB, 128KB, 192KB
None, 64KB, 128KB, 192KB, 256KB, 320KB,
384KB
70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%,
110%, 115%, 120%, 125%, 130%, 135%, 140%
Level 1 (Slow) - Level 6 - Level 9 (Fast)
*1
Initial setting: Page 0: PC437 (USA, Standard
Europe)
*1
Initial setting: USA
1, 2, 3, 4
Monochrome, two-color
38 mm - 80 mm (1 mm pitches)
Light, Medium, Dark
Paper type
P35024
KF50
F5041(55)
KL80GT
TM-L90/TM-L90 Peeler Model Technical Reference Guide
Density level
90%
95%
100%
130%
Msw Setting Msw Setting
utility Mode
✓
✓
✓ ✓
*1
✓ ✓
✓ ✓
✓ ✓
✓
✓ ✓
*3
✓ ✓
✓
Setup 53