Epson TM-L90 Technical Reference Manual page 18

❏ When error recovery with FEED button is enabled by memory switch 8-1, if a paper layout
error occurs, pressing FEED button recovers from the error and performs automatic paper
layout.
When using receipt paper:
❏ Pressing this button once feeds paper by one line. Holding this button down feeds paper
continuously.
PAPER OUT LED (with the TM-L90)
❏ Lights when there is no more roll paper or there is little remaining.
(Default setting. The LED condition varies according to the memory switch settings. Refer to
"Memory Switch Settings" on page 44 and "Error Code" on page 113 for details.)
❏ Off when there is a sufficient amount of roll paper remaining.
(Default setting. The LED condition varies according to the memory switch settings. Refer to
"Memory Switch Settings" on page 44 and "Error Code" on page 113 for details.)
❏ Flashes when a self test is in progress or when the printer waits for the macro execution
switch to go on.
PAPER OUT LED (with the TM-L90 Peeler Model)
❏ Lights when there is no more roll paper or there is little remaining.
(Default setting. The LED condition varies according to the memory switch settings. Refer to
"Memory Switch Settings" on page 44 and "Error Code" on page 113 for details.)
❏ Off when there is a sufficient amount of roll paper remaining.
(Default setting. The LED condition varies according to the memory switch settings. Refer to
"Memory Switch Settings" on page 44 and "Error Code" on page 113 for details.)
❏ Flashes when a self test is in progress or when the printer waits for the macro execution
switch to go on.
❏ When the roll paper is inserted and the roll paper cover is closed, one label is ejected and the
LED starts flashing. It flashes until FEED button is pressed.
❏ When a label is issued, flashing starts after it is issued. The LED flashes until the label is
removed from the peeler.
POWER LED
❏ Lights when the power supply is on.
❏ Off when the power supply is turned off.
❏ Flashes during execution of each operation.
ERROR LED
❏ Lights when the printer is offline.
❏ Off under normal conditions.
❏ Flashes when an error occurs. (Refer to "Error Code" on page 113 for details)
18 Product Overview