2.3 Adjusting Roll Paper Near-End Detection Position
2.3.1 With TM-L90
Below are three situations when roll paper N.E. detector adjustment is required.
❏ When changing the way of installation. (Vertically
❏ To adjust the location of detection to suit the diameter of the roll paper core used.
❏ To adjust the amount of remaining paper desired.
Note:
Roll paper centers are manufactured according to various specifications, making it impossible to exactly
detect the remaining amount of paper.
N.E. detector
(location when
installing horizontally)
Part names and the locations of N.E. detector components
1. Open the roll paper cover.
2. Remove the roll paper.
TM-L90/TM-L90 Peeler Model Technical Reference Guide
Horizontally)
N.E. detector holder
Detector adjustment screw
N.E. detector window
when installing vertically
Setup 27