Connecting To The Power Source; Connecting The Ac Cable - Epson TM-T82II Technical Reference Handbook

Connecting to the Power Source

 Be sure to use the specified AC adapter only.
 Never insert the AC cable plug into a socket that does not meet the rated voltage
WARNING
 Should a fault ever occur, immediately turn off the power to the printer and unplug

Connecting the AC cable

1
Make sure the printer is turned off.
2
Connect the AC cable to the AC adapter.
3
Connect the DC cable of the AC adapter to the power supply
connector.
requirements of the printer.
Doing so may result in damage to the printer.
the AC cable from the wall socket.
Chapter 2 Setup
AC adapter
AC cable
2
49