Initializing The Settings (#8 Clear) - Canon Super G3 Fax Board-J1 Service Manual

8 Initializing the Settings (#8 CLEAR)

Select any of the following items to initialize the appropriate data item.
When initialized, the parameter settings in question will be retuned to factory settings.
Item Data initialize
TEL telephone number registration data, memory box
USER SW user data and data stored under SSSW#1 through #3
(The user data under memory management will not be affected. The
image data stored in memory will not be erased.)
SERVICE SW user data and contents of #1, SSSW, #2MENU, #3NUM, #7PRINT
NCU contents of SSSW#4
ISDN not used
SERVICE contents of the system dump list
DATA
REPORT contents of the communication management report
ALL all settings/registered data (except image data & Type settings)
COUNTER number of prints, number of pages read
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000
CHAPTER 5 SERVICE MODE
CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001
5-29