Numeric Param - Canon Super G3 Fax Board-J1 Service Manual

CHAPTER 5 SERVICE MODE
7.2 NUMERIC Param. (numeric parameter setting)
Sssw Menu Num Ncu Type ISDN
<NUM>
001 002
003
004
005
006
007
008
No. Function
01 Missing areas of printing image
when receiving image with longer
length than standard
04 Leading edge blank area
[No. 1]
Use it to set the range of the image to be removed from when printing an extra-length re-
ceived image.
Lower the parameter to decrease the range if the trailing edge of the received image must
be retained (as when it is longer than the effective recording length).
[No. 4]
Use it to set the leading-edge margin for the effective recording length.
5-28
COPYRIGHT © 2001 CANON INC.
Print Clear Test
<1/4>
← (yyyyy) {aaaaa~bbbbb}
← (yyyyy) {aaaaa~bbbbb}
xxxxx
xxxxx
← (yyyyy) {aaaaa~bbbbb}
xxxxx
← (yyyyy) {aaaaa~bbbbb}
xxxxx
← (yyyyy) {aaaaa~bbbbb}
xxxxx
← (yyyyy) {aaaaa~bbbbb}
xxxxx
← (yyyyy) {aaaaa~bbbbb}
xxxxx
← (yyyyy) {aaaaa~bbbbb}
xxxxx
F05-702-01
Setting range Initial setting
0 to9999 15
0 to9999 8
2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001
Report
<READY>
OK
Unit
1mm
1mm