Canon Super G3 Fax Board-J1 Service Manual page 52

Revision 0

Table of Contents

CHAPTER 5 SERVICE MODE

[Bit 4, 5, 6]

Use it to select an appropriate transmission mode: international transmission (1), interna-

tional transmission (2), or international transmission (3).

Use the service soft switch or the dial registration function to select the appropriate trans-

mission mode if errors occur frequently at time of transmission to overseas.

Any of the following error codes may be indicated because of an echo at

time of transmission:

Memo

##005, ##100, ##101, ##102, ##104, ##201, ##280, ##281, ##283, ##284,

##750, ##760, ##765, ##774, ##779, ##784, ##794

Using the Dial Recognition Function (user level)

Select 'international transmission (1)' when making an entry in the Address Book. If er-

rors still occur, select 'international transmission (2)' and then 'international transmission

(3)' in sequence until errors stop. The transmission mode selected using the One-Touch Dial

function or the Speed Dial function will be give priority over the setting made by the service

soft switch.

An international transmission mode may be selected using the keypad if a mode has been

selected using this switch; for settings, see the following table:

Bit

Transmission mode

International transmission (1)

International transmission (2)

International transmission (3)

International transmission (1):

International transmission (2):

International transmission (3):

5-10

select it to ignore the first DIS signal from the other

party.

select it to transmit a 1850-Hz total signal when

transmitting the DIS signal.

select it to transmit a 1650-Hz total signal when

transmitting the DIS signal.

2000 2000 2000 2000

CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001

Table of Contents

Troubleshooting

Do you have a question about the Super G3 Fax Board-J1 and is the answer not in the manual?