Canon Super G3 Fax Board-J1 Service Manual page 59

#1 SSSW-SW25: report display function setting
Bit Function
0 transmission telephone number
indicated report
1 not used
2 not used
3 not used
4 not used
5 not used
6 not used
7 not used
[Bit 0]
Use it to select the transmission telephone number indicated on the report at the end of
transmission.
caller's number:
number of other party:
When 'caller's' is selected, the telephone number (CSI signal data) from the
other party will be indicated on the report if the call is made not using the
Memo
One-Touch Dial or Speed Dial function.
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000
1
other party's
-
-
-
-
-
-
-
indicates the telephone number of the caller on the report.
indicates the telephone number (CSI signal data) sent from the
other part on the report.
CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001
CHAPTER 5 SERVICE MODE
0 Factory setting
caller's 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
5-17