Installing Hardware Key; Seal Device - Siemens SITRANS F M MAG 5000 Operating Instructions Manual

4.5.1

Installing hardware key

Use hardware key on non-verified transmitter
1. Mount hardware key on transmitter connection plate during setting of primary operating
2. Remove hardware key after setting up and calibrating unit.
4.5.2

Seal device

Seal transmitter
Seal transmitter to prevent unauthorized access.
SITRANS F M MAG 5000/6000
Operating Instructions, 12/2013, A5E02338368-002
parameters such as Q
max
commissioning or calibration. See setup menus in appendix menu diagrams.
This locks the menu structure and the selected settings.
Note
Hardware key function
Setting of primary operating parameters is blocked during normal operation.
When key is mounted, access to all menu items is gained. When key is removed, primary
settings are blocked in accordance with requirements in authorisation.
CAUTION
., low-flow cut-off, units, approvals, etc. in connection with
Installing/Mounting
4.5 MAG 5000/6000 CT
29