Siemens SITRANS F M MAG 5000 Operating Instructions Manual page 29

3. Fit M20 or ½" NPT cable glands for cables from bottom or sides of terminal box.
4. Mount earth wire in bottom of terminal box.
5. Mount connection plate in terminal box.
6. Fit coil, electrode, supply and output cables through cable glands and connect to
7. Fix connection plate with the two diagonally opposite screws.
SITRANS F M MAG 5000/6000
Operating Instructions, 12/2013, A5E02338368-002
①
Connect electrode cable
②
Connect coil cable - keep separate from electrode cable
③
Connect power supply
④
Connect output cable
⑤
Connect PE (ground) wire
①
Electrode cable
②
Coil cable
③
Power supply
④
Output cable
connection plate as shown in Electrical connection (Page 36).
Installing/Mounting
4.4 Remote installation
27