Recalibration - Siemens SITRANS F M MAG 5000 Operating Instructions Manual

Service and maintenance

9.4 Recalibration

Required forms
● Delivery Note
● Cover Note for Return Delivery with the following information
● Declaration of Decontamination
You can find the forms on the Internet and on the CD delivered with the device.
9.4 Recalibration
Siemens A/S Flow Instruments offers to recalibrate the sensor. The following calibrations are
offered as standard:
● Standard matched pair calibration
60
Cover note
(http://cache.automation.siemens.com/dnl/zY/zY0OTg1AAAA_16604370_TxtObj/Begleits
chein_RW_AD.pdf)
– product (ordering number)
– number of devices or spare parts returned
– reason for the return
Decontamination declaration
(http://pia.khe.siemens.com/efiles/feldg/files/Service/declaration_of_decontamination_en.
pdf)
With this declaration you certify
carefully cleaned and are free from any residues.
If the device has been operated together with toxic, caustic, flammable or water-
damaging products, clean the device before return by rinsing or neutralizing. Ensure that
all cavities are free from dangerous substances. Then, double-check the device to ensure
the cleaning is completed.
We will not service a device or spare part unless the declaration of decontamination
confirms proper decontamination of the device or spare part. Shipments without a
declaration of decontamination will be cleaned professionally at your expense before
further proceeding.
Note
For recalibration the SENSORPROM
sensor.
that the returned products/spare parts have been
memory unit must always be returned with the
®
Operating Instructions, 12/2013, A5E02338368-002
SITRANS F M MAG 5000/6000