Mircom FX-2003-6DS Installation And Operation Manual page 5

Common controls and indicators for System Reset, Lamp Test, Fire Drill, Signal Silence,
•
General Alarm,
General Alarm Cancel, AC On, Pre-Alarm, and Ground Fault.
•
Two Spare configurable Keys and LED Indicators.
•
16 configurable LEDs (bi-coloured) with slide-in labels, available with the DSPL-420-
•
16TZDS display.
Provides drift compensation for photoelectric smoke detectors.
•
Provides Signal Coding of signal circuits for easy alarm identification (code consists of 1
•
to 4 digits, each digit consisting of 1-15 pulses on the signal).
Selection for Canadian (ULC) or USA (ULI) requirements for Smoke Sensor sensitivity.
•
Extensive transient protection.
•
Surface Mountable Enclosures with removable doors for easy installation and service.
•
Flush Trims available.
Removable Terminal Blocks for easy wiring and service.
•
Loop Adder modules ALC-198S and ALC-396S for expanding addressable loops by 1
•
and 2 respectively.
Adder module ALC-H16 hardwire loop interface board for expanding conventional input,
•
output, relay capability.
2
Introduction