Section 5: Troubleshooting - Edgetech 3100-P Hardware Manual

SECTION 5:
Should some operational or performance problems occur with the 3100-P Sub-Bottom Profiling System,
it may be possible to correct them using the troubleshooting guide provided below.
This troubleshooting guide identifies some symptoms that could occur and presents one or more possible
causes and the recommended corrective action for each. When using the troubleshooting guide, perform
the corrective action for any given symptom in the order of possible causes, which generally corresponds
to the degree of troubleshooting difficulty, from the simple to the more complex.
Before proceeding with any corrective action, verify the following:
•
The topside is plugged into an appropriate power source.
• The 3100-P Portable Topside is switched on.
NOTE:
Be sure to also verify that all the cables in the topside and the tow
vehicle are properly mated and are not loose or damaged. Most causes
of operational or performance problems are a result of poor connection.
TROUBLESHOOTING
5-1