Troubleshooting; Troubleshooting The Sv Sensor; Figure 8-2: Sonar 192.9.0.101 Remote Desktop Connection Window - Edgetech 6205S2 User Hardware Manual

Bathymetry & side scan system

Hide thumbs Also See for 6205S2:

Table of Contents

8-50

8.0 T R OU BLES HO OTI NG

In some cases, the sound velocity sensor may not start operating correctly. When this occurs, Discover

Bathymetric will show a Port 4: Error on its Diagnostic Window, indicating that no sound velocity

measurements are being reported to the sonar head. An example of this error is shown in

If this error persists longer than 30 seconds, follow the procedure below to resolve the issue:

1. Place the Sonar Head in water, deep enough to submerge the SV probe (immerse the sonar head

so that only the uppermost edge of the sonar head is exposed). This will submerge the sound

velocity sensor as well.

2. On the Windows Desktop, launch Remote Desktop to Sonar. The following window should

appear:

3. Click on Menu > Misc > Serial Port Information.

4. Check Chan 4 on Com 4 from the dropdown list to see if any data is being reported by port.

6205s2 BATHYMETRIC AND SIDE SCAN SONAR

Figure 8-1: No Sound Velocity on Port 4

8-1.

IGURE

0025262_REV_A

Table of Contents