Advantech-DLoG DLT-V6210 Quick Start And Installation Manual page 7

Notes about the attachment of device mounts and accessory mounts
Mechanical expert knowledge is required for correct attachment of device
mounts (e.g. mounting bracket, RAM mount) and accessory mounts (e.g. for
scanner, keyboard) on the DLT-V6210.
− Use suitable mounting material (screws and washers).
− Observe the maximum screw-in depth of the holes of the DLT-V6210:
The recommended screw-in depth of D x 1 always applies
(screw diameter x 1).
ATTENTION: Screws that are too long, e.g. in the VESA mounting hole
pattern, can pierce the rear side of the DLT-V6210 and cause irreparable
damage to the device.
VESA mounting hole pattern 75 x 75 mm:
7